You are here:
  1. Home
  2. Arcade Accessories
  3. AtGames LED Trackball Kit
(1 customer review)

AtGames LED Trackball Kit

Price range: $18.99 through $34.99

Add RGB LEDs to your AtGames Control Panel

Replacement trackball and optional RGB LED Kit for the AtGames control panels.

LED Kit requires a compatible RGB controller (like PicoCTR) for software control. LED Kit includes a static LED board that is powered by the trackball to select between 7 colors.

** Does not include the entire trackball assembly, only the trackball itself. RGB Buttons not included. **

Red, Green, and Blue LEDs have a separate connection wire. Yellow wire is 5 volts, RGB wires are ground. Plugs directly into the ACustomArcade WS2812B RGB Adapter, Ultimarc PacLED64 or Ultimarc Ultimate I/O boards.

** IMPORTANT ** The trackball LED DOES NOT include a current limiting resistor. Users are responsible for ensuring the proper Voltage and Current are applied to the LED.

1 review for AtGames LED Trackball Kit

  1. rstout1971 (verified owner) –

    Absolutely a must kit for ALU and ALP’s !!

Only logged in customers who have purchased this product may leave a review.

You may also like

HDMI Adapter for AtGames Legends Ultimate 1.1/1.2/Mini

HDMI Adapter for AtGames Legends Ultimate 1.1/1.2/Mini

$39.99
The product allows you to connect any HDMI, VGA or DVI device to the LCD in the AtGames Legends Ultimate 1.1/1.2/Mini. Adapters are included to connect the stock speakers and volume controls to the adapter without requiring an amp or cutting/soldering any cables. Once installed, you will no longer be able to connect the AtGames Main Board to the LCD. You will need to uninstall it in order to use the ALU as normal. You cannot switch between the ALU and another HDMI, VGA or DVI device. Supports 1080p.
ALU 1.1/1.2 Ultimate RGB Kit

ALU 1.1/1.2 Ultimate RGB Kit

$239.99
Save $32.38 by bundling! This kit includes the following products:
  • PicoCTR 2 Player
  • WS2812B RGB Adapter - 30 RGB
  • 16 ACustomArcade RGB Buttons
  • ALU Trackball Kit
  • 16 Red 2.8mm adapters
  • 16 Black 2.8mm adapters
ACustomArcade RGB Button (Convex)

ACustomArcade RGB Button (Convex)

$5.99
RGB pushbutton in translucent white.
  • 2.8mm contacts with quick-connect harness included (for connection to our WS2812B adapter)
  • 5V input (does not limit current)
  • Convex pushbutton (domed)
Legends BitPixel Accessory (LBPA)
AtGames Device

Legends BitPixel Accessory (LBPA)

$50.00
LBPA is an accesory for the Arcade Legends Ultimate arcade cabinet v1.1 and the Legends Pinball to install a BitPixel internally in the cabinet. No cutting, soldering, etc. required.
LPCB Next
Out Of Stock

LPCB Next

$99.00
Conversion board for the AtGames Arcade Legends Ultimate arcade cabinet v1.1, v1.2 and the Arcade Legends Ultimate Mini. No cutting, soldering, etc. required.